1. User Office VPN Access
   • Identify which office the user needs to connect to
   • Check the Radius section within Jump Cloud to identify what group the corresponding office is in
   • Add user to the same user group(s)
     • In this case you would need to add the user to OPD reporting to access the 70
       Broadway Office
2. Acquire VPN Configuration Settings (In step 3 when we go to setup the VPN you will need to know both the VPN IP address as well as the pre-shared key)
   • Using the Meraki VPN web portal select the office the user needs access (In this case it would be the Denver office for 70 Broadway​​​​​​Select the office)
   • Expand the "Security & SD-WAN" tab

• "Select Appliance Status"
• 
• WAN 1 contains the VPN IP address needed for VPN configuration
• Get the Pre-shared Key
  • Expand Security & SD-WAN
  • Select Client VPN
    
  • The Shared Secret is going to be used as the Pre-shared Key
  •  
  • Take note of both the Pre-shared Key and VPN IP address (WAN1)

3. Configuring Users VPN on their machine (This section of the SOP comes from an older article showing how to configure a VPN on a user's PC. Follow the instructions using the Pre-shared Key and VPN IP Address (WAN1) that you found in Step 2)

• Fill out the information below using the information specific to the office you are connecting to. 
  • The connection name can be anything so long as the Server address matches the VPN IP Address (WAN1)
  • Be sure to use your Pre-shared Key not the one in the example. (They may be the same however)
  •  
  • Finally go to control panel and edit the properties for the VPN network adapter we just created.
  •  
  • The user can then connect to the VPN by entering their windows credentials, solong as you moved them into the proper JumpCloud group in Step 1!
  • ​​​​​​​